I have just bought a new kitchen faucet! It was very easy to install: here is how to change yours!

Whether a leak or a drip you are experiencing or you simply just want to redo your kitchen, you are probably going to have to learn the art of replacing that kitchen faucet. Of course, it would help you out in the long run learning how to install one as it is a simple task when it comes to ranking home improvement tasks. Using just a few tools and about half an hour, even people that don’t consider themselves handy can manage to change a faucet and not even break a sweat.

The following are some guidelines and a list of things you will need to make installing best rated touchless kitchen faucets easy as pie. The basic tools that you will need are…

    • Faucet installation toolkit
    • Adjustable wrench
  • Phillips screwdriver

Step 1

The first step is to turn off the cold and hot water lines. Next, you should begin removing that old kitchen faucet and any associated hardware. Go under the counter and use the adjustable wrench and then starting disconnecting faucet hoses from water supply lines and removing the nuts holding the faucets in place, which are located under the surface of the sink.

Step 2

After removing the faucet, there will be between one to three holes where the faucet once was. The faucet installation kit should match the number of holes you have. Single hose sinks require a spout-based gasket, and then feed the hoses to the faucet through gasket to align it with the faucet’s bottom. For sinks with three holes, use a deck plate. Just like the proves outlined previously, feed hoses through holes and then align with the faucet’s bottom.

Step 3

Once the deck plate or gasket is attached to the faucet’s bottom, feed hoses through the sink’s center hole. Everything should be properly aligned, with the spout facing forward, with all holes completely covered.

Step 4

For countertops less than half an inch in thickness, you will have to use the support bracket that’s included in the installation kit. From the sink’s underside, slide bracket over faucet hoses and then hold brackets in place. If your countertop is more than half an inch in thickness, skip this step and move on to the next.

Step 5

The installation kit comes equipped with a metal circular washer. Slide it over the hoses and all the other hardware.

Step 6

The next step involves holding hoses to focus on faucet shank. Then you can take nuts from installation kit and then slide upwards. Use fingers and then tighten nuts.

The nut holds the faucet together so it is very important that it be extremely tight with no leakage possible. Place tool over nuts and faucet shanks before then turning to tighten. In some instances, the tool might be too difficult to turn with your hands, and this is why many plumbers use flat-head screwdrivers to twist it as tight as possible.

Interested in bathroom faucet reviews today? Check out kitchenfaucets.reviews.

I have been trying to reduce my water usage around the house! Here are some of the things I am doing.

In 1994, the federal mandated faucets, low-flow showerheads, and toilets burst on to the scene in substantial numbers. In order for you to conform to these new standards and increase the efficiency in your house, what can be done? Luckily, there are some things that can be done to cut down on water waste. The following are some tips to significantly reduce the water usage in your home.


At Home

  • Nearly 10 gallons each day is lost because of leakage. If you repair leaky toilets and faucets, this amount can be reduced.
  • Save up to 15 gallons by using a low-flow showerhead when taking a ten minute shower
  • The more minutes you shave off of hot water usage, the more you save on energy costs
  • Choose a shower over a bath and reduce the gallons you use to cleanse
  • Retrofit your toilet tank and save nearly 20 gallons daily
  • Adjust the settings on your washing machine and save water use by properly loading the machine
  • Use water efficiency settings on dishwasher, which is more efficient than actual handwashing. Kitchen faucet leakage is also a risk to consider



Pools and Yards


  • Up to 60% of household water usage can go to garden and lawn maintenance
  • The climate you live in dictates the water usage on your lawns as well
  • Pools use on average 22,000 of water and many gallons can be lost if pools are not covered




  • The water necessary for a diet is more than global water footprints on average
  • Eating less dairy and meat products can reduce water footprints. For example, a quarter pounder equates to 30 American showers on average
  • One serving of poultry costs approximately 90 gallons to produce
  • As pork uses water for production, consider reducing the consumption of it
  • Vegan lifestyles also use less water
  • One cup of coffee equates to 55 gallons as the majority of it is used by H20 to grow coffee beans



  • Alternative energy sources like solar and wind can dramatically reduce your footprint
  • Wash your car with less frequency, as it can use up about 150 gallons


Power Consumption


  • The United States uses almost 5% of total water withdrawals to produce materials and fuel industry
  • A pound of cotton takes approximately 100 gallons, so we should be asking ourselves if we truly need a new cotton t-shirt
  • By buying recycled goods, we are able to conserve more water; also recycling things when you are done using them. Buy only the things that you truly need and leave unnecessary items by the wayside
  • The water necessary to produce your laptop could potentially wash 70 loads in a standard washing machine cycle
  • To recycle 1 pound of paper could potentially save nearly 3.5 gallons. If you buy products made of recycled paper, you can substantially save on the amount of water being used – it takes nearly six gallon to produce paper worth about a dollar

These are some of the best projects you can do to improve and add value to your house

Although adding a steel door to your home may not sound all that sexy, it can definitely be one of the best investments to home renovation. According to Remodeling Magazine, homeowners should seriously look into adding a steel door as it can dramatically increase the asking price of a home when it comes time to sell.


Exterior work on properties can dominate the long list of potential projects that can offer more bang for the money. The return is higher because a sale can be made through exteriors alone, according to many real estate agents. In many instances, it is all about that first impression when pulling up to a driveway and seeing a property from outside. Many potential buyers generally assume that the exterior of a house dictates the inside as well, which is not always the case, but they may think it all the same.


Exterior projects can significantly increase a home’s value and tend to be more practical and appealing to new buyers. The following home improvements have proven to be more impactful for home sales and are well worth considering for a bigger return on your investment.


Two Story Addition


Going from a first floor to adding a second story and square footage is a great way to increase the size of the home and dramatically change the look of it as well as the value. This news comes courtesy of Remodeling Magazine, which has seen many homeowners go this route before placing their home on the market.


Remodeling Bathroom

Increasing the size of a current bathroom and replacing fixtures in it from the wash basin to ceramic tiling, new shower heads, and toilet can make a huge difference in the look of a home.



Finishing Basements



Basement remodel

Potential homeowners are typically very impressed with basements that have been remodelled, with entertainment areas and wet bars getting many potential homeowners excited about the prospect of a finished basement that can actually be fully utilized. If done correctly, it can definitely impact the overall value of a home.


Replacement Window Projects


Not only do new windows look better and provide more insulation, but they also save homeowners more money on energy costs. Woo is the trim finished that is most preferred, but there are others that can pay huge dividends too. Vinyl windows have a ROI of nearly 80%, while upscale version can get an ROI of 76.6%, making both of them great options to consider when renovating a home.


Small Kitchen Remodel

Projects that fall under small renovation for a kitchen include replacing cabinets, replacing countertops, faucets, new hardware, and possibly new flooring. Renovations in the kitchen are always preferred as it is considered the heart and soul of just about any home. Major kitchen renovations cost on average $54,000 and come with a 74.2% ROI.


Replacing Garage Doors


Although replacing garage doors can improve the overall look of your home’s exterior, an upgrade is only necessary if it has been damaged or is visibly tattered. An average cost for such a renovation will cost just under $3000, with an offer of 83% ROI.